Transmitter (Tx)
VDL Link status
Antenna VSWR
Reflected Power
Receptors (AIS Rx1/Rx2)
RF Receiving modules
Synchronization
UTC direct / indirect sync
GPS System
Antenna / receiver sync
GPS Receiver
10 / 12
Sats Visible / Used
3D DIFF GPS
Data Link Load
18%
Current VDL utilization
Ok
Date / Time (UTC)
--:--:--
Synchronized to GPS
--/--/----
Hardware Environment
42 °C
Mainboard Temp
24.2 VDC (OK)
| Type | MMSI | Vessel Name | Lat | Lon | COG | SOG | Dist (NM) |
|---|
Configuration Access Protected
Entering Configuration Mode requires authorization credentials. (Default: "Config")
Invalid password. Case-sensitive. Please try again.
System Component Information
| Base Station Model | Saab R40 Coastal AIS Base Station |
| Firmware Kernel | v4.2.1-Build1084 |
| Hardware Mainboard Revision | Rev C - SAAB TransponderTech |
| DSP Radio Processor | v3.12-R40 |
| GPS Module OEM | NovAtel OEM6 GNSS Receiver |
| MAC Address | 00:0B:4D:15:3A:4C |
Activated Software Licenses
VDL Repetidor Functionality
ACTIVE
Encrypted Safety Messaging (SRM)
ACTIVE
RTCM Corrections Input
ACTIVE
DGPS Base Station Operation
ACTIVE
Multi-destination Routing Protocol
DISABLED
VDL Link Congestion Override (FATDMA)
ACTIVE
Simulated Firmware Update
Upload a Saab bin file to update the internal base station controller.
Select Firmware File (*.bin)
Console waiting for task...
Download SNMP Definitions
Obtain the Management Information Base (MIB) text file to configure SNMP monitoring tools like Nagios, Zabbix or PRTG.
Download SAAB_R40.mibReboot Base Station
Forces a hot restart of the DSP processor cores and GPS synchronization loops. Will interrupt transmission for 60 seconds.
SAAB TRANSPONDERTECH
R4 Class A
TX
RX
ALARM
TARGET LIST
TX:ON
GPS:OK